If you can no longer open the GUI, it’s because you have removed the keybind(s) for it. There are two ways how you can fix this problem.

Method 1 - The Easy Way

The easiest way to get the GUI keybind back is to reset your keybinds to the default values, as shown below:

  1. Open the Wurst Options.

    Wurst Options button

  2. Select “Keybinds”. This will open the Keybind Manager.

    Keybinds button in Wurst Options

  3. Press the Reset Keybinds button. This will reset all keybinds to their default values, including the ones for the GUI.

    Reset Keybinds button in Keybind Manager

Method 2 - The Manual Way

Another way to get your GUI keybind back is to add it manually. To do that, follow the steps below:

  1. Open the Wurst Options.

    Wurst Options button

  2. Select “Keybinds”.

    Keybinds button in Wurst Options

  3. In the Keybind Manager, press the Add button.

    Add button in Keybind Manager

  4. On the “Add Keybind” screen, first press the Change Key button to select a key for this new keybind. In this example, we will be using the left CTRL button.

    Then type .t navigator into the “Commands” text field and press the Save button.

    Adding a keybind for Navigator